The Wand by Ispire is a handheld induction heater with two distinct uses. It heats the caps of DynaVap vaporizers without a torch. With the included borosilicate glass cups, it also works on its own as a portable concentrate vaporizer. Pairing it with a DynaVap is well known in the community, and one of the most popular ways to run one flame-free.
It looks like a stout flashlight and works in the hand rather than on a desk. Instead of torch technique you set a number: for the concentrate cups you choose a temperature, and for DynaVap caps that same setting gives you the same heating cycle every time. No more guessing with a flame.
Induction generates heat inside the metal cap itself rather than on its outer surface. The cap warms evenly all the way around, and nothing else gets hot. A torch creates hot spots and forces you to guess. The Wand gives you anything from 120 °C to 425 °C in 5-degree steps, shown on a clear digital display.
That precision pays off. You avoid heating too little or too much, you stop wasting material, and you get the same result every session. Consistent heat means consistent extraction, and owners report that each load lasts them longer.
Press the button five times to turn it on. In automatic mode, a double-click runs a full cycle. The light pulses white while the cap heats, then holds steady once your set temperature is reached - your signal to inhale. In manual mode, you hold the button down and heat for as long as you want.
With a DynaVap, you drop the capped end into the Wand's heating opening and lift it out when you hear the cap click. No butane, no flame indoors, no scorched cap edges. With a glass cup fitted, the Wand heats the cup itself, so you can take concentrate draws without a DynaVap.
Two 2900 mAh 18650 batteries come in the box and slide in through the base. That matters more on an induction heater than on most devices. Heating coils are hard on batteries, and being able to drop in a fresh pair years from now is what keeps the Wand usable long-term.
Charging runs over USB-C with pass-through, so you can keep using the Wand while the batteries fill. A USB-C cable is included, but no wall plug. The USB-C Fast Charger (45W) is a good wall charger for the Wand and your other USB-C gear. A spare pair of Ampace JP30 or Eve 30P cells (sold separately) doubles your runtime away from a charger. The Xtar X2 tops up the spares outside the device.
The YLL Induction Heater 3.0 is the other one we stock: a desktop unit with adjustable wattage, a timer and a larger coil. Its 100-watt output is what bigger devices such as the Tempest 2 need.
The Wand is strong in the opposite areas. It is handheld and small enough to fit in a pocket, it heats by set temperature rather than power, and the batteries come in the box. The glass cups also add a concentrate mode the YLL does not have. If you mainly use a DynaVap and want to take your gear with you, the Wand is the natural choice. If you use a Tempest 2 or keep several devices on one desk, the YLL 3.0 is the better fit.
Right now we offer a 25% discount on all accessories when you buy the Wand here at MagicVaporizers.
Ampace JP30 - 3000 mAh 18650 Battery: A spare pair lets you swap in fresh cells mid-session, so the heater keeps running once the first pair is empty.
Xtar X2 - Battery Charger UK: Charges two 18650s outside the Wand, and the display shows when they are ready.
The Ispire Wand comes with a 2-year warranty. Every unit we sell is an authentic Ispire product.
